FREQUENTLY ASKED QUESTIONS

missing parts — Frequently asked questions

Page 35/42

Will the wrong missing parts dowel I ordered void my 10-year structural warranty?

No, ordering the wrong size does not void anything, as long as you have not drilled, glued, or forced the part. The structural warranty covers manufacturing defects in the original frame, not buyer-side errors. Send a photo of the trial fit, and the workshop will re-cut the correct dowel within 5-7 working days. Keep the unused dowel in its sealed bag; MIDHILL's after-sales team accepts returns of unopened hardware within 14 days. Local courier collection from a Tampines block is usually free above S$50.

Can silicone polish ruin my missing parts finish?

Yes, silicone polish is the single most common reason MIDHILL sees warranty claims. Silicone migrates under lacquer, leaves a hazy bloom, and stops future refinishing from bonding. Always use a pH-neutral soap, about 5 ml per litre of water, on a damp microfibre, then buff dry within 30 seconds. The written care sheet inside every MIDHILL carton lists the approved cleaner. Switching to silicone costs nothing to buy but voids the 2-year surface warranty if finish discolouration is later inspected.

What's the best interior style to pair with replacement missing parts in a modern Malaysian condo?

For a modern Malaysian condo look in a Punggol or Jurong unit, Scandinavian or Japandi styles let pale oak and ash missing parts disappear into the room. Avoid pairing warm walnut replacement hardware with cool greys, as the colour clash reads as accidental. Add a 2 m linen curtain in stone, a 200x300 cm wool rug, and a single fiddle leaf fig to anchor the corner. Buy the rug and curtain first, then match missing parts to that palette, not to the original furniture.

Can I buy missing parts that match a sage painted wardrobe in a Tampines BTO?

Sage painted finishes vary widely between brands, so order a 5x5 cm colour chip first; the Jurong warehouse dispatches swatches within 48 hours for S$8. Test the chip against your wardrobe under both daylight and 3000K downlight. For a clean match, specify RAL 7033 or 7039 if your wardrobe is European stock, or request a custom mix; MIDHILL's Lecong workshop can tint a small batch within five working days. Keep the original carton for the 14-day return window if the shade drifts more than 5 delta-E.

Will mould grow on missing parts if I leave them in my HDB storeroom for 3 weeks?

Not if you keep them in the original vapour-barrier bag with the desiccant sachet sealed. The crate timber is kiln-dried below 12% moisture, and the bag is rated for 90-day storage. Open the bag only when you are ready to install, and air the part 10 minutes in your air-con bedroom first. If the desiccant feels damp on arrival, request a free replacement from the Jurong warehouse. Mould risk rises sharply after 6 weeks in a non-aircon storeroom in Bedok or Jurong.

Do replacement missing parts for a wardrobe fit through a 4-room HDB corridor?

Most replacement parts ship in cartons under 1.2 m long, so they clear the standard 1.1 m wide HDB corridor. Older 4-room blocks along Bedok Reservoir and some Tampines streets have narrow 0.9 m passages near the refuse chute, in which case angle the carton vertically. Measure the tightest turn first, usually at the lift lobby. MIDHILL packs the cam-lock bolts and dowels in a separate inner box so small parts never get lost at the door.

How do I check that the missing parts dowel I ordered is the right colour?

Hold the dowel and an offcut of your original furniture under a 4000K bulb, ideally the same downlight you use at home. Colour drift over 5-7 delta-E is visible only in direct comparison. Pale oak ages slightly warmer over 12-18 months in Singapore, so a perfect match today may drift. The MIDHILL workshop can re-stain a small batch within five days for an extra S$35 if the first shade is too grey. Always keep the unused dowel in case a re-match is needed within the 14-day window.

Can I order missing parts handles that match a Korean minimal interior?

Yes, Korean minimal interiors in Singapore condos tend to pair pale ash or white oak with slim black or brushed brass handles, and MIDHILL stocks both finishes in 96 mm and 128 mm centres. Match the centre-to-centre measurement of your existing handle to the nearest 32 mm, then drill a fresh pilot. For a soft Japandi twist, swap hardware first, before buying a rug or lamp, as the wrong handle shape clashes more loudly than any colour. All handles ship within 7 working days from the Jurong warehouse.

What curtain and paint colour should I pair with light oak missing parts?

Light oak missing parts read warmer next to cool greys, so try a soft putty beige such as Nippon 5GY 8.5/0.5 or Dulux Natural White. Avoid bright white, which makes oak look orange under Singapore afternoon sun. Hang a 2 m linen curtain in stone, oatmeal, or sage; a 200x300 cm wool rug in tauro grounds the floor. Buy paint samples first, tape them to the wall for 48 hours across a wet and dry day, then order the missing parts to match the tested palette, not the showroom.

Will my solid oak missing parts warp during a 3-week storage in a Jurong storeroom?

Solid oak is kiln-dried to 8-10% moisture, but Jurong storerooms without air-con average 28-30°C and 78% RH, so warping is possible past 4 weeks. Store the part flat on the original crate base, never on one edge, and keep the vapour barrier intact. Place a dehumidifier set to 55% RH in the room for the first week after moving the part home. The 10-year structural warranty covers factory warping, not storage movement, so log the date you received the carton.

Are replacement missing parts covered by a 14-day return in Singapore?

Yes, unopened hardware in its sealed bag can be returned within 14 calendar days for a full refund minus a S$15 collection fee. Opened parts that do not fit are eligible for a one-to-one swap if you provide a photo within 7 days. Local courier collection is free above S$50, otherwise drop the parcel at any SingPost branch. The refund lands in your PayNow or credit card within 5-7 working days. Custom-tinted batches are non-returnable, so always order a colour swatch first.

Which common styling mistakes should I avoid when installing replacement missing parts?

The three most common mistakes in Singapore flats: forcing a dowel into a swollen joint, mixing warm brass and cool chrome hardware in the same room, and fitting the part against a freshly painted wall that has not cured 14 days. Buy missing parts before you repaint, and prime the surface first. Never sand a replacement dowel to fit; order the correct 8 mm or 10 mm size and the joint closes cleanly. A 5-minute dry-fit saves a S$120 callout fee.

How do I request a production record and photos for my missing parts order?

Email your order number to the MIDHILL after-sales desk; they pull the dated batch record within two working days. Each part passes multi-stage inspection with photos at sanding, finishing, and packing. The same Foshan workshop that has exported to 15+ countries since 2008 keeps the file for 10 years, matching the structural warranty window. You can also book a Lecong showroom visit by appointment, usually two working days to shortlist and five days to a written specification.

Can I store missing parts in a self-storage unit in Tampines without damage?

Yes, but choose a climate-controlled unit, not a standard one, as outdoor humidity swings above 85% RH will swell solid oak within 6 weeks. Keep the part flat on its original crate base, leave 10 cm clearance on all sides for airflow, and replace the desiccant monthly. Avoid stacking anything on top. The 10-year structural warranty covers factory defects, not storage damage, so log the move-in date and unit number for any future claim. Climate units in Tampines run about S$120-180 monthly.

Are Scandinavian missing parts warmer than oak alternatives?

Scandinavian-style missing parts are usually cut from pale birch, beech or light-stained oak, which read visually warmer than painted MDF. Scandi interior logic pairs these pale tones with linen sofas, black metal floor lamps and rattan baskets. For a Punggol or Tampines BTO, pair the dowel with a jute rug and warm-white 2700 K bulbs so the timber does not look yellow at night. MIDHILL finishes its solid-wood parts with nitrocellulose lacquer on vertical surfaces and a tougher cross-linked polyurethane on horizontal ones, so the matte Scandi look survives daily wipe-downs.

Walnut solid wood missing parts vs rubberwood — which lasts longer?

Walnut scores around 1010 on the Janka hardness scale versus rubberwood at about 960, so a solid walnut dowel holds a cam-lock about 8–12% tighter over time. Walnut also has a darker, more consistent grain that hides minor scuffs in high-traffic areas like a Bedok five-room HDB corridor. Rubberwood is cheaper and perfectly fine for hidden internal joins. For matching a walnut TV console or bed headboard, buy MIDHILL walnut replacement parts — they are cut from the same FSC-tracked stock and shipped in crates with desiccant packs rated for the three-week monsoon stretch.

Missing parts vs solid wood — is there really a difference?

Yes. A solid wood missing part is cut from one piece of timber, so it has continuous grain end-to-end and resists splitting under load. Engineered or “veneer-core” dowels glue thin laminations together and can delaminate in 80–90% relative humidity, which is normal Singapore outdoor air. For load-bearing cam-lock bolts on a wardrobe or bed, always specify solid hardwood. MIDHILL exports solid-wood dowels, cam-bolts and wooden handles from its Foshan workshop since 2008, batch-traceable with date-stamped inspection photos you can request with any order.

How long does delivery of missing parts take to a Tampines HDB?

Standard courier to a Tampines, Bedok or Jurong HDB block usually arrives in 7–12 working days from a Foshan warehouse, including Singapore GST 9% paperwork. Each small parts parcel is under 2 kg, fits any lift and does not need a private contractor. Free shipping applies over US$350 (about S$505). For a 14th-storey corridor layout, the courier brings it door-to-door, no staircase carrying. Track your parcel with the order number and keep the batch-slip to claim the 10-year structural warranty if anything goes wrong after assembly.

Will my missing dowel warp in Singapore humidity?

A properly kiln-dried hardwood dowel (moisture content 8–12%) will not warp in Singapore indoor humidity of 50–70%. Outdoor storage on a corridor or balcony can push it to 85% moisture and cause swelling. MIDHILL packs every replacement in low-moisture export crates with desiccants matched to parcel volume and a vapour barrier, so the dowel arrives at 10–12% MC. Once opened, lay the dowels flat in an air-conditioned room for 24 hours before gluing. Keep one spare in a zip bag with silica gel for emergencies.

Should I store spare missing parts in the storeroom or bedroom wardrobe?

The bedroom wardrobe wins, because it is air-conditioned and stays around 24°C with 50–60% RH. A typical HDB storeroom can hit 32°C and 85% RH, which over six months can swell a 10 mm dowel by 0.2–0.3 mm and ruin the fit. Keep dowels flat in the original zip bag with the supplied silica gel. MIDHILL prints the batch code on every bag, so future warranty claims stay valid. Avoid silicone polishes near the spare parts — they leave a film that blocks glue adhesion the next time you need to repair.

Do replacement missing parts void my 10-year warranty?

No, provided the parts are sourced from the original maker and the work is logged in the batch record. MIDHILL explicitly covers replacement components under the same 10-year structural warranty as long as you keep the dated batch photo and invoice. DIY repairs with generic hardware-store dowels do void cover. Keep before-and-after photos of the repair, note the date and the dowel batch code, and email it to support. Surface finish is covered two years; refinishing is free for life under the same warranty scheme.

What rug colour works best with my missing wooden cam-bolt during assembly?

Lay a low-pile jute or sisal rug under the work area, not a thick wool rug — jute resists dropped tools and scuffs. Colour rule: if the dowel is beech or birch, pick ivory or greige; if it is walnut, pick terracotta or charcoal. A 160 x 230 cm rug fits most four-room HDB living rooms in Punggol or Sengkang and gives you a soft landing for small hardware. After assembly, vacuum the rug and wipe the dowel with a barely damp microfibre cloth. Never use silicone spray, as it blocks future glue bonds.

How do I clean missing wooden parts without ruining the finish?

Wipe with a barely damp microfibre cloth, then dry immediately — never let standing water sit on the end grain for more than 30 seconds. Use pH-neutral soap diluted 1:100, never bleach, degreaser or silicone polish. The cleaning sheet shipped in every MIDHILL crate lists this exact routine. Abrasive cleaners cause roughly 70% of surface warranty claims, not actual use damage. For sticky residue, use a tiny amount of isopropyl alcohol on a cloth, then re-wax with the supplied hard paste wax once a year on horizontal surfaces.

Are walnut solid wood missing parts a good gift for a new homeowner?

Yes — a set of walnut replacement dowels, cam-bolts and wooden handles in a labelled kraft box is practical, under S$80, and feels personal. It suits anyone who just collected keys to a Tampines or Punggol BTO and started building flat-pack furniture. Add a small tin of paste wax and a printed care card. MIDHILL boxes come with batch codes so the recipient can register the parts online and activate the 10-year structural warranty. Use a kraft ribbon, not glossy wrapping, to keep the Scandi or Muji-minimal aesthetic.

Can I paint my missing wooden parts to match a dark accent wall?

Yes, but prep properly. Lightly sand with 220-grit, wipe with a tack cloth, then apply a water-based primer before any topcoat. For a bold navy or forest-green accent wall common in Singapore condos, an eggshell finish hides minor dents. Do not use oil-based paint on small dowels — it soaks unevenly into end grain. MIDHILL solid walnut dowels take paint well because the grain is tight. Seal with two thin coats of water-based polyurethane and let cure 72 hours before inserting, to avoid blocking a 10 mm female socket.

Should I buy missing parts before or after assembling the furniture?

Wait until you have unboxed the main piece and confirmed exactly which part is missing — wrong sizes are the single most common return reason. Snap a photo of the part-list page, the broken stub still in the joint, and the batch code on the carton. Then order by species, diameter and length, not by generic SKU. Orders under S$60 ship faster via standard courier; over US$350 (about S$505) gets free shipping. MIDHILL records the batch photo so your replacement arrives cut from the same wood batch as your original furniture.

What floor lamp should I pair with my missing oak dowel during a repair?

Use a warm 2700 K LED floor lamp with a linen drum shade — anything 4000 K and cooler will make oak look grey. A 1.5 m arc lamp clears most HDB dining tables and lights the repair nicely on the floor. Place dowels, glue and a microfibre cloth on a drop sheet, not directly on laminate flooring. After the repair, the same lamp complements the Japandi or Scandinavian look of oak. MIDHILL finishes with a hand-rubbed sequence — finer abrasives, paste wax on felt, then buff — so under warm light the grain reads deep and even.

Can I order just one missing dowel or is there a minimum order?

Most suppliers, including MIDHILL, allow single-dowel orders but apply a small handling fee below S$50. Bundles of 4, 8 or 16 dowels in mixed sizes (8 mm, 10 mm, 12 mm) work out cheaper per piece and cover future repairs. Always order matching cam-bolts and wooden handles at the same time to consolidate shipping under the US$350 free-ship threshold. Bags are labelled with batch code, diameter and species, so you can grab the right spare six months later during an emergency Sunday repair before Chinese New Year guests arrive.

Do MIDHILL missing parts fit non-MIDHILL flat-pack furniture?

Often yes, because MIDHILL uses standard JIS and IKEA-compatible dowel sizes — 8 x 30 mm fluted, 10 x 40 mm and 12 x 50 mm are the most common. Measure the broken dowel you have with calipers first. If the original was 7.5 mm, order 8 mm and sand lightly. MIDHILL exports to 15+ countries with batch-traceable stock, so colour and density stay consistent. For Asian hardwoods like rubberwood or nyatoh, specify the species on the order form. Free shipping kicks in over US$350 and full GST invoice is included for Singapore delivery.

What plant pairs well with my missing beech dowels during a weekend repair?

A medium Sansevieria or ZZ plant in a matte terracotta pot fits on most HDB console tables in Bedok or Clementi without crowding the repair area. Avoid fiddle-leaf fig — leaf drop creates sticky residue that stains dowels. Keep the work zone plant-free during gluing; sap and soil both contaminate 10 mm sockets. Once the repair cures, the green foliage complements the pale honey tone of beech. MIDHILL supplies a small sachet of desiccant with every dowel order — drop one into the plant pot tray to absorb excess humidity during the wet season.

Is it safe to ship missing parts to a 14th floor HDB corridor?

Yes, the standard courier brings parcels door-to-door to a 14th-storey HDB in Tampines, Toa Payoh or Woodlands. Each parts parcel is usually under 2 kg, well within any lift weight limit. The carton dimensions stay below 60 x 30 x 20 cm, so it clears lift doors and most corridor turns. No private contractor or staircase hauling needed. Allow 7–12 working days from Foshan, including 9% GST paperwork. Free shipping applies over US$350 (around S$505). Keep the courier tracking number with your batch record for the 10-year warranty.

Which interior style suits my missing oak dowel best?

Scandinavian and Japandi styles both love oak dowels because the pale grain fits minimalist palettes. For a Muji-style Punggol BTO, pair the dowel with cotton linens, rattan baskets and white walls. For a modern Malaysian condo look, combine walnut dowels with darker teak accents. Avoid ornate French provincial pairings — they fight the clean Scandinavian lines. MIDHILL ships dowels in low-moisture crates with desiccants matched to cargo volume, so the oak arrives ready for the 27-degree-Celsius, 80%-RH conditions of an un-air-conditioned Singapore storeroom.

Can missing wooden dowels handle Singapore outdoor balcony humidity?

Short term, yes. Long term, no. Tropical outdoor conditions push relative humidity above 85% and UV hits end grain directly. A 10 mm beech dowel can swell 0.2–0.3 mm and become unusable. Store dowels indoors at 50–60% RH, ideally in an air-conditioned bedroom wardrobe in the original zip bag with silica gel. For balcony furniture, choose MIDHILL replacement parts cut from FSC-tracked teak or walnut, which hold dimensional stability much better. Re-apply a thin coat of paste wax every six months on horizontal surfaces to keep moisture out.

Are MIDHILL missing parts covered if they warp in my storeroom?

Only if the storeroom stays within normal indoor ranges and you followed the printed care sheet. MIDHILL covers manufacturing defects — wrong moisture content at dispatch, delamination, hidden cracks — under the 10-year structural warranty. Warping from storing dowels in a balcony or outdoor corridor is not covered, because humidity hit 90% and the timber absorbed it. For Singapore storage, keep parts flat in the original bag with desiccant in an air-conditioned room. Email photos and the batch code to support; the team reviews claims within five working days.

What cushion colour matches my missing walnut dowel during a living-room refresh?

Pick cushions in earthy, slightly muted tones — burnt sienna, mustard, moss green or oat. Walnut dowels read reddish-brown, so cool greys wash out next to them; warm cream linen pops instead. For a four-room HDB in Jurong East with a 1.8 m sofa, two large 60 x 60 cm linen covers and a 40 x 60 cm bolster pull the look together. Avoid glossy satin — it photographs too shiny against hand-rubbed walnut. MIDHILL finishes its solid-walnut parts with a hand-rubbed nitrocellulose lacquer sequence that glows under warm 2700 K bulbs.

Missing parts delivery to Punggol EC — how many working days and is GST included?

Standard missing parts delivery from our Foshan warehouse to a Punggol executive flat takes 18–25 working days by sea-air via Singapore. GST 9% is added at checkout, shown as a separate line before payment. Orders above US$350 ship free; below that a US$28 courier surcharge applies to any HDB or condo address in Punggol, Sengkang or Punggol West. Tracking link is sent within 48 hours of dispatch.

Where can I find American rattan missing parts that match my existing Tampines condo rack?

We stock American rattan missing parts in diameters 12mm, 18mm and 25mm, lengths 40–120mm, and four stain tones — natural honey, driftwood grey, dark walnut and weathered white. Send a daylight photo of your rack to our Singapore desk; we match rattan colour and spline thickness. Each set ships in a moisture-controlled carton with desiccant matched to cargo volume, important in Tampines corridor humidity that sits around 78–82% RH year round.

Missing parts for small home office — how do I pick sizes that actually fit a 9 sqm study?

For a 9 sqm home office inside a 4-room HDB flat, choose missing parts under 45cm length so the carton (max 55x18x32cm) clears the standard 80cm HDB corridor turn. Cam bolts, dowels and mini camlocks pack into one slim carton weighing under 1.2kg, easy to carry past your Bedok or Jurong lift lobby. Match furniture width to desk depth 55–60cm so door clearances still work.

MIDHILL warranty — does ordering missing parts one year after delivery void the 10-year cover?

MIDHILL, Foshan solid wood furniture maker since 2008, keeps its 10-year structural warranty and 2-year surface cover active when you order genuine missing parts for the original piece. Send your order ID and dated batch record (we keep multi-stage inspection logs per shipment). Refinishing is lifetime at cost. Warranty stays valid as long as you followed the written cleaning instruction that ships in every crate.

Do missing parts cartons fit through a 4-room HDB corridor that is only 1.2m wide?

Yes. Our largest missing parts carton measures 55x38x28cm and weighs 4.8kg, which clears a 4-room HDB corridor at 1.2m and turns a standard 0.9m lift. We use low-moisture crate timber, desiccant matched to cargo volume, and a vapour barrier so nothing warps during your Bedok or Clementi lift ride. GST 9% shown at checkout; US$350 frees shipping.

Missing parts — what rug pairs with the beech dowel set I just received?

Your beech dowel set sits warm and pale, so pair it with a low-pile wool rug in oat, ivory or soft sage, 160x230cm for a 3-seater HDB living room. Avoid high-pile shaggy rugs which trap humidity against your furniture base in Tampines or Punggol. Lift the rug weekly and air it; this prevents mould creeping onto adjacent furniture, important at 80% RH all year.

Missing parts storage — can I keep spares in my storeroom for three wet months?

Yes, with care. Store missing parts in the original sealed bag with the desiccant sachet we ship — labour is cheap. Place the bag inside a plastic tote, not directly on a concrete storeroom floor, because HDB storerooms in Bedok and Jurong often read 85% RH in monsoon weeks. Add a silica gel refill every 60 days. The vapour barrier carton protects against mould three weeks.

Missing parts colour match — how do I match a replacement dowel to my existing oak sideboard?

Send three daylight photos to our Singapore desk: full cabinet, close-up of a current dowel, and a colour-card reference under the same lighting. We stain new dowels to your sample using the same nitrocellulose lacquer sequence — progressively finer abrasives, paste on felt block, buff, remove swirl marks. Match tolerance ±5%. Order intake: 2 working days, 5 working days to specification from the Lecong showroom.

Missing parts — what floor lamp and curtain match my new walnut dowels?

Walnut dowels read warm and slightly red, so pair them with a brass or matte-black tripod floor lamp 150–160cm tall, and linen curtains in stone, oat or muted terracotta, 230cm drop for HDB ceiling at 2.6m. Skip white plastic lamp shades, which clash with the mid-century modern Malaysian condo look popular in Punggol and Sengkang. Keep 25cm clearance between lamp and curtain to avoid heat damage.

Missing parts arrive before Chinese New Year — what is the cut-off date?

For missing parts delivery before Chinese New Year, place orders by 25 January for direct addresses in Tampines, Bedok, Jurong and Punggol. Sea-air transit takes 18–25 working days; festive demand adds 5 days. GST 9% applies. We pause dispatches 7 days before CNY and resume the second working day after. Order above US$350 to skip the US$28 surcharge and lock your festive furniture fix.

Missing parts — what paint colour goes with my new oak dowels in a Scandinavian scheme?

Oak dowels glow warm against cool Scandinavian walls — try Jotashield or Nippon Vinilex shades in Snow White 2111, Light Grey 2294 or Soft Sage 2291. Matte emulsion, not silk, prevents visible roller marks in Punggol or Tampines afternoon light. Avoid yellow-beige paints that clash with oak’s pink undertone. Free colour chip with every order above US$350; 9% GST at checkout.

Missing parts — what is the cushion pairing mistake to avoid with my beech dowels?

The common mistake is pairing warm beech dowels with cool grey cushions only — the room reads flat. Add one ochre, rust or forest-green cushion to anchor the eye. In a 4-room HDB living room keep cushion count to five maximum to avoid visual clutter. Rotate cushions weekly; Singapore humidity at 80% RH settles dust on fabric faster than on sealed wood finishes.

Missing parts — can I order just two cam lock bolts without paying full shipping?

Yes. Single or small orders of missing parts under US$350 carry a flat US$28 courier surcharge to any Singapore address — HDB flat, condo or landed. Above US$350 the order ships free. GST 9% applies either way and shows as a separate line. We pack two cam lock bolts in a 120g padded envelope, which fits any HDB letterbox in Bedok, Jurong or Punggol.

Missing parts for a Japandi scheme — which finish should I order?

Japandi likes pale timber, so order missing parts in natural beech, ash stain or pale oak. Avoid dark walnut, cherry or high-gloss finishes — they read heavy against Japanese minimal shapes. For a Punggol Waterway condo look, pair ash dowels with a linen sofa in stone, a single ceramic vase, and one trailing pothos. Keep accessories to three pieces; Japandi hates clutter. Above US$350 frees shipping; GST 9%.

Missing parts arrive warped — is mould the cause or the transit?

Warped missing parts almost always mean moisture, not transit. Our crates use low-moisture crate timber, desiccant matched to cargo volume, and a vapour barrier, so transit humidity stays inside the carton below 60% RH. The usual culprit is opening the carton during a HDB corridor rain burst in Bedok or Jurong East, then storing parts in a 85% RH storeroom. Return within 14 days for replacement.

Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Next
MIDHILL — solid wood furniture, Foshan China. Shop the collection

Home